Lantronix SecureBox SDS1100 User Manual page 38

SDS1100 User Guide
Command String Result if remote IP is 129.1.2.3 and remote port is 1234
C121.2.4.5/1
C5
C28.10/12
Autostart (Automatic Connection): If autostart is enabled, the unit automatically
connects to the remote IP address and remote port specified.
Datagram Type: When selecting this option, you will be prompted for the Datagram
type. Enter 01 for directed or broadcast UDP.
Hostlist: If you enable this option, the Lantronix unit scrolls through the hostlist until it
connects to a device listed in the hostlist table. Once it connects, the unit stops trying
to connect to any others. If this connection fails, the unit continues to scroll through
the table until it is able to connect to another IP in the hostlist. Only Channel 1
supports the hostlist option.
Table 3-7. Manual Connection Address Example
Complete override; connection is started with host 121.2.4.5, port 1
Connect to 129.1.2.5, port 1234
Connect to 129.1.28.10, port 12
Figure 3-11. Hostlist Option
38
3: Configuring the Unit