Lantronix SecureBox SDS1100 User Manual page 22

SDS1100 User Guide
4. Select Assign a specific IP address to assign a static IP address to the device
or select Obtain an IP address automatically to enable BOOTP, DHCP, or
Auto IP on the device.
5. Click Next. The following Assign IP Address window appears.
6. Enter the IP address, subnet mask, and gateway being assigned to the device.
Enter this information in XXX.XXX.XXX.XXX format.
7. Click Next. The following Assign IP Address window appears.
Figure 2-6. Assign IP Address Window (IP Settings)
22
2: Getting Started