12V, 12A Electric Ignition Diagram; Alternator; Alternator Battery Charger Graph (12V, 12A) - Kohler KD225 Workshop Manual

122
123
124
KD 225_315_350_400_440 Workshop Manual_cod. ED0053029330_1° ed_ rev. 00

12V, 12A electric ignition diagram

Components:

1 Alternator

2 Starter motor
3 Voltage regulator
4 Battery
5 Pressure switch
6 Oil pressure light
7 Key switch
8 Battery charging light
Note: The battery, which is not supplied by KOHLER, should have
12V nominal voltage rating and a capacity of not less than 44
Ah / 210 Amp. of fast discharge intensity.
Alternator
Components:
1 Ring gear
2 Flywheel
3 Rotor
4 Stator
Fixing screws must be tightened to 1.2 Nm.
Note: The rotor is made up by a plastoferrite ring which is fixed to
flywheel while the stator is mounted on the crankcase.

Alternator battery charger graph (12V, 12A)

This test has been carried out after thermal stabilization at 20°C for
2 minutes at 3000 r.p.m. with constant battery voltage of 12.5V.
The value of the power supplied with reference to the curve may
change in a range between +10% and -5%.
ELECTRICAL SYSTEM
11
- 61 -