128
129
KD 225_315_350_400_440 Workshop Manual_cod. ED0053029330_1° ed_ rev. 00
12V electric starter diagram with voltage regulator built into the
ignition panel
Components:
1 Alternator
2 Starter motor
4 Battery
5 Pressure switch
6 Solenoid valve
7 Ignition switch
Note: The battery, which is not supplied by KOHLER, should have
12V nominal voltage rating and a capacity of not less than 44
Ah / 210 Amp. of fast discharge intensity.
12V electric ignition layout with motor protection (optional)
Components:
1 Alternator
2 Starter motor
4 Battery
5 Pressure switch
6 Solenoid valve
7 Ignition switch
8 Panel
Note: The battery, which is not supplied by KOHLER, should have
12V nominal voltage rating and a capacity of not less than 44
Ah / 210 Amp. of fast discharge intensity.
ELECTRICAL SYSTEM
11
- 63 -