Speed Governor; Speed Governor Removal; Refitting Gear Cover On Timing Side - Kohler KD225 Workshop Manual

79
80
81
KD 225_315_350_400_440 Workshop Manual_cod. ED0053029330_1° ed_ rev. 00
DISASSEMBLY/REASSEMBLY

Speed governor

Components:
1 Spool spacer
2 Spool
3 Weights
4 Spool guide
5 Gear
6 Oil pump driving shaft
7 Circlip
8 Thrust ring

Speed governor removal

Spool guide 1 has retainers one end which prevent spool 2 from slip-
ping out.
To remove the speed governor use a suitable tool to slightly widen
the two teeth.

Refitting gear cover on timing side

Proper sealing between gear cover and crankcase is ensured by the
liquid sealant "Loctite 5205". Carefully clean the two sealing surfaces
and spread the sealant uniformly.
Tighten screws to 23 Nm.
Wait 3 hours before starting the engine.
8
- 45 -