Disassembly/Reassembly; Disassembly And Reassembly; Dry Air Cleaner For Kd 315 And Kd 350; Dry Air Cleaner For Kd 225 - Kohler KD225 Workshop Manual

8

DISASSEMBLY/REASSEMBLY

WARNINGS!
During repair operations, when
using compressed air, wear eye
protection.
1
3
- 20 -
2
KD 225_315_350_400_440 Workshop Manual_cod. ED0053029330_1° ed_ rev. 00

DISASSEMBLY AND REASSEMBLY

Besides disassembly and reassembly operations this chapter also
includes checking and setting specifications, dimensions, repair and
operating instructions. Always use original KOHLER spare parts for
repair operations.
Clean the filtering element with air blast. Air must be blown
from inside to outside the cartridge at a distance of at least 15
cm from the paper.
Lightly and repeatedly tap the element on a hard surface to
eliminate all excess dirt.

Dry air cleaner for KD 315 and KD 350

Cartridge components:
1 Seal
2 Metallic body
3 Polyurethane prefilter
4 outer mesh
5 Filter media
6 Blade
7 Inside envelope
8 Metallic body
9 Inner seal
Cartridge characteristics:
media porosity 7 µm, useful filtering area 1960 cm
Polyurethane pre-filter characteristic:
porosity 60 p.p.i., front area 207 cm
Note: Pre-filter 3 can undergo maintenance operations; if dirty, wash
with soap and water and dry ( maximum 10 cleanings ). See
page 18 for cartridge replacement.
Clean the filtering element with air blast. Air must be blown
from inside to outside the cartridge at a distance of at least 15
cm from the paper.
Lightly and repeatedly tap the element on a hard surface to
eliminate all excess dirt. Replace if irreparably clogged.

Dry air cleaner for KD 225

Cartridge components:
1 Complete cover
2 Filtering material
3 Support
Characteristics of the filtering material:
paper porosity : 3 µm
filtering area : 4400 cm²
outer ring in open-cell polyurethane
See page 18 for the frequency with which the filtering material must
be changed.
.
2
.
2