Selecting Paper Tray, Mff, Or Manual Paper Feed 2 - 1 - Fujitsu PrintPartner 12V User Manual

Control Panel Functions
2-10
Selecting Paper Tray, MFF, or Manual Paper Feed (TRAY SELECT)
Pressing TRAY SELECT puts the printer in tray select mode which allows
you to select paper sources to be used. The paper sources are tray 1, tray
2 (if installed), MFF (if installed), and manual feed slot. When a paper
source runs out of paper, the printer switches it for another one. When
the manual feed slot is selected, other paper sources are made invalid.
To select a paper source, follow these steps:
1. Make sure that the message display indicates READY with the
ONLINE and DATA indicators off.
2. Press the TRAY SELECT button briefly.
The message changes to TRAY
that tray 1 is selected.
3. Select or deselect a paper source.
This step is valid when tray 2 or MFF (option) is installed.
Pressing the ENTER button in this condition makes the asterisk
disappear. Tray 1 is deselected. Pressing the ENTER button again
makes the asterisk reappear. Tray 1 is selected.
4. Select or deselect other paper sources.
Press the + or - buttons briefly to display another paper source.
Use the ENTER button in the same way as described above.
5. Save the selections.
Press READY button to save the new settings and return to the
ready state.
TRAYl*. The asterisk means
User' s Manual