Table of Contents
Advertisement
Control Panel Functions
2-10
Selecting Paper Tray, MFF, or Manual Paper Feed
Pressing
you to select paper sources to be used. The paper sources are tray 1, tray
2 (if installed), MFF (if installed), and manual feed slot. When a paper
source runs out of paper, the printer switches it for another one. When
the manual feed slot is selected, other paper sources are made invalid.
To select a paper source, follow these steps:
1. Make sure that the message display indicates
ONLINE and DATA indicators off.
2. Press the
The message changes to
that tray 1 is selected.
3. Select or deselect a paper source.
This step is valid when tray 2 (option) or MFF (standard) is
installed. Pressing the
asterisk disappear. Tray 1 is deselected. Pressing the
button again makes the asterisk reappear. Tray 1 is selected.
4. Select or deselect other paper sources.
Press the + or - buttons briefly to display another paper source.
Use the
button in the same way as described above.
5. Save the selections.
Press
button to save the new settings and return to the
ready state.
puts the printer in tray select mode which allows
button briefly.
TRAY
TRAYl*.
button in this condition makes the
READY
with the
The asterisk means
User' s Manual
Advertisement
Table of Contents
