Installing A Printer Driver; Printer Drivers Supplied By The Cd-Rom; Printer Drivers Supplied By The Floppy Disk; Standard Printer Driver For Windows 3.1/3.11 - Fujitsu PrintPartner 12V User Manual

User' s Manual
If you encounter problems with this installation, confirm that your
configuration corresponds to the minimum requirements listed on
page vi at the start of this manual. If the configuration corresponds
to these requirements and troubles persist, contact your dealer for
assistance.
When running application programs under Windows, you select the
printer type in the application program itself before you print a
document.
Important:
If you encounter conflicts with other already installed external drivers
that use bidirectional communication on the Centronics port or with
drivers of other dedicated Windows printers used in parallel with this
printer (conflicts like the failure to establish communication between
the Printer Driver and the printer), remove these from Windows and
reinstall the PrintPartner 12V Printer Driver.

Printer Drivers Supplied by the CD-ROM

To install printer drivers contained in the CD-ROM, see the booklet
"Quick Start" enclosed in the CD-ROM envelope.

Printer Drivers Supplied by the Floppy Disk

To install the Windows 3.1/3.11 or 95 Printer Standard Drivers
contained in the floppy disk, follow these steps:

Standard Printer Driver for Windows 3.1/3.11

1. Start Windows.
2. Insert the PrintPartner Printer Driver disk into the 3.5 inch
floppy disk drive of your computer.
3. From the Windows Program Manager, select the "File" menu and
choose the "Run" command.

Installing a Printer Driver

1-21