Fujitsu PrintPartner 12V User Manual page 63

Menu Items
2-18
FPS menu
Whether the jammed page is reprinted
Jam recovery
Whether an error report is printed out
Print FPS errors
Time interval to be allotted between jobs
Job timeout
Wait timeout Time interval to be allotted for waiting a job
end
Time interval to be allotted for manual
Manual timeout
insertion
Mode selection Switching printing control (band/full page)
Auto mode Standard setting. Automatically switches the
following two modes depending on the total
RAM capacity.
11MB or less (standard 4MB + optional
7MB or less): equivalent to virtual memory
mode
12MB or more (standard 4MB + optional
8MB or more): equivalent to speed mode
Speed mode Attaches importance to speedup of printing
control, thus processing all pages per job. Print
density depends on the RAM capacity.
300 dpi when total RAM capacity is 4M to
11M bytes (standard 4MB + optional 7MB or
less)
600 dpi when total RAM capacity is 12M
bytes or more (standard 4MB + optional 8MB
or more).
Note:
To print at 600 dpi when total RAM
capacity is 4M to 11M bytes (standard 4MB +
optional 7MB or less), select memory mode.
l To print on legal-size paper, expand the total
RAM capacity to 12M bytes or more (optional
8MB or more) even in printing at 300 dpi or
select memory mode.
(Virtual) memory mode. Attaches importance
Memory mode
to reliable printing rather than speedup, thus
processing data per page.
User' s Manual