Fujitsu PrintPartner 12V User Manual page 96

User´s Manual
Important:
Whenever you replace the toner bottle, clean the corona wire and the
precharger wire to prevent a degradation in print quality.
You can continue to print after the toner low status if the print
quality is still satisfactory. However, you must at least prepare a new
toner bottle.
To replace the toner bottle, follow these steps:
Caution:
Be careful not to allow dust or foreign matter into the toner hopper.
Periodic Routine Meintenance
Open the upper door.
Tap the toner bottle. Tap
the toner case to drop any
remaining toner from toner
bottle into print unit. This
avoids the remaining toner
from being spilt inside the
printer during replacement.
Unlock and remove the
old toner bottle. Pull the
top of the toner bottle
toward you to swing bottle
from the upright position to
the removable position.
Gently remove the bottle. If
necessary, clean toner
around the toner hopper
entry of the print unit.
4-3