Installing An Interface Board; Connecting To The Localtalk Port - Fujitsu PrintPartner 12V User Manual

LocalTalk interface board

Installing an Interface Board

(Example; Ethernet
interface)

Connecting to the LocalTalk Port

To connect to the LocalTalk port, simply connect the interface cable
between the printer and your computer.
User´s Manual
Ethernet interface board
Centronics board
Installing an interface Expansion Board
IrDA interface board
1. To install an interface
board, first make sure the
printer is turned off.
Remove the interface board
slot cover from the back
right of the printer.
2. Hold the board with the
parts mounting side left.
Slide the board into the
empty interface slot using
the guides, and push it until
it stops. Secure the board by
the two screws supplied
with it.
3-5