Adjusting Print Density - Fujitsu PrintPartner 12V User Manual

User' s Manual
6. Print your document.
Start the program. The default paper size is fixed to A4 (for
Europe) or Letter (for the USA). However, you can print a
document on a different size of paper using the manual feed slot
which you can choose in the Printer Driver' s main window.

Adjusting Print Density

If you feel that the printout is too light or too dark, adjust the print
density by turning the print density dial. It is located inside the top
cover above the control panel. Turning the dial clockwise darkens
the print. A counterclockwise adjustment lightens the print. After
making the adjustment, close the top cover, print your trial
document again, and check the results.
If you see a problem with the printed pages other than print density,
see Chapter 5 for possible causes and solutions.
If your document printed successfully, skip the next subsection. If
Something Goes Wrong.
Printing Your First Document
Print density dial
1-27