qualified inspector will be required. Users must ensure compliance with all applicable safety
requirements.
Turbosound recommends regular safety inspections and further recommends that a logbook
be kept detailing the test and inspection history of each Turbosound rigging accessory.
Turbosound has adopted the following load safety factors:
12 x load safety factor: Chains, ropes, shackles, eyebolts, straps and hooks.
5 x load safety factor: Accessories generally employed in fixed, permanent
installations.
Always wear protective headwear, footwear, and eye protection in accordance with local
regulations. Anyone involved in flying ANY sound system, especially in a touring capacity,
should take note of the following advice:
The rigging of a flown sound system may be dangerous unless undertaken by qualified
personnel with the required experience and certification to perform the necessary tasks.
Fixing of hanging points in a roof should always be carried out by a professional rigger and
in accordance with the local rules of the venue. The house rigger and/or building manager
must always be consulted.
Flying System components have been individually tested in accordance with
the following UK/EU regulations:
The Health and Safety at Work Act 1974
The Supply of Machinery (Safety) Regulations 1992
The Lifting Operations and Lifting Equipment Regulations 1998
Each component is covered by a Record of Load Test Certificate, which may be obtained on
request from Turbosound, quoting the identifying number(s) from the flying equipment.
user manual
FLEX ARRAY
FLEX ARRAY user manual
Page 33
Need help?
Do you have a question about the Flex Array TFA-600H and is the answer not in the manual?