3G/4G-Lte Status - Billion BEC MX-1000 User Manual

3G/4G-LTE Status

This page contains 3G/4G-LTE connection information.
Status: The current status of the 4G LTE connection.
Signal Strength: The signal strength bar and dBm value indicates the current 4G LTE signal strength.
The front panel 4G LTE Signal Strength LED indicates the signal strength as well.
Signal Information: Shows important LTE signal parameters such as RSRP (Reference Signal
Receiving Power), RSRQ (Reference Signal Receiving Quality), SINR (Signal to Interference plus
Noise Ratio).
 RSRP (Reference Signal Receiving Power): is the average power of all resource elements which
carry cell-specified reference signals over the entire bandwidth.
 RSRQ (Reference Signal Receiving Quality): measures the signal strength and is calculated
based on both RSRP and RSSI.
 RSSI (Received Signal Strength Indicator): parameter which provides information about total
received wide-band power (measure in all symbols) including all interference and thermal
noise.
 SINR (Signal to Interference plus Noise Ratio): is also a measure of signal quality as well. It is
widely used by the operators as it provides a clear relationship between RF conditions and
throughput. NOTE: Some LTE modules do not provide this information.
Network Name: The name of the LTE network the router is connecting to.
Cell ID: The ID of base station that the device is connected to.
Card IMEI: The unique identification number that is used to identify the 4G LTE module.
Card IMSI: The international mobile subscriber identity used to uniquely identify the user of a celluar
network – a number provisioned in the SIM card..
Network Mode: Show the using network mode.
Network Band: Show the using network band.
Refresh: Press this button to refresh the statistics.