Clear An Original Jam - Oce TDS100 User Manual

Clear an original jam

Introduction
The media jam indicator blinks and the message code 'E 0' displays to indicate
that an original jam occured. The type of original determines how to clear the
original jam. The types of originals are divided into the following.
Fragile originals
Normal originals.
When to do
You need to clear an original jam in the following situations.
The original is jammed
The media feed stopped during the copy job
The red stop key was pushed during a copy job.
How to remove a fragile original
Pull the top cover towards you and lift the top cover to open it.
1.
[17] Open the top cover
[17] Open the top cover
Remove the original
2.
Lower and push the top cover backwards until you hear or feel a click
3.
Check on a media jam also and clear the media jam if necessary.
4.
(see 'Clear a media jam' on page 43)
How to remove a normal original
Pull the original carefully with two hands toward you
1.
Check on a media jam also and clear the media jam if necessary.
2.
(see 'Clear a media jam' on page 43)
Maintain the Océ TDS100 41