Indicators - Christie DHD800 User Manual

Indicators

DHD800 User Manual
020-000244-01 Rev.1 (08-2010)
Part Names and Functions
POWER indicator
This indicator lights green when the projector
is ready to be turned on. And it flashes green in
Power Management mode. (pp.57 , 79-81)
LAMP Indicator
This indicator is dim when the projector is turned
on. And bright when the projector is in stand-by
mode. (pp.79-81)
WARNING TEMP . indicator
This indicator flashes red when internal projector
temperature is too high. (pp.72, 79-81)
WARNING FILTER indicator
This indicator does not work in the default state.
When a filter cartridge (supplied) has been
installed in the projector, it works as follows:
– Blink slow when the filter is being scrolled.
(pp.64, 79)
– Blink fast when the filter scroll is not working
properly. (pp.64, 81)
– Light orange when the clogging of the filter is
detected or the filter counter reaches a time set
in the timer setting, urging immediate filter/ filter
cartridge replacement. (pp.62, 64, 81)
SHUTTER indicator
Light blue when the shutter is closed. (p79)
LAMP 1 REPLACE indicator
Turn orange when the life of the projection lamp1
draws to an end. (pp.68, 80)
LAMP 2 REPLACE indicator
Turn orange when the life of the projection lamp2
draws to an end. (pp.68, 80)
13