Computer Input Source Selection - Christie DHD800 User Manual

Computer Input Source Selection

Menu Operation
When Selecting the INPUT 1 with DVI/D-sub 15 terminals
Press the MENU button to display the On-Screen Menu.
1
Use the Point
to the INPUT Menu icon.
Use the Point buttons to move the red arrow pointer
2
to the desired input and then press the SELECT button.
Then you can switch to the desired input.
3
Press the select button again. The Source Select Menu
appears.
4 Use the Point
and then press the SELECT button.
RGB (PC analog)
When your computer is connected to the INPUT 1 (ANALOG)
terminal, select RGB (PC analog).
RGB (PC digital)
When your computer is connected to INPUT 1 (DIGITAL)
terminal, select RGB (PC digital).
When Selecting the INPUT 2 with 5-BNC/Video/S-video terminals
RGB
When your computer is connected to the INPUT 2 (5 BNC
INPUT JACKS) terminal, select RGB.
Note:
• When a slot is empty, the input is displayed in grayout.
DHD800 User Manual
020-000244-01 Rev.1 (08-2010)
buttons to move the red frame pointer
buttons to select the desired source
INPUT MENU
Input Menu icon
Move the pointer (red arrow) to Input
1 and press the SELECT button.
Input 1
INPUT MENU
Input Menu icon
Move the pointer (red arrow) to Input
2 and press the SELECT button.
Input 2
Input Selection
Source Select Menu
Move the pointer (red
arrow) to the desired source
and press the SELECT
button.
Source Select Menu
Move the pointer (red
arrow) to RGB and press the
SELECT button.
33