Christie DHD800 User Manual page 31

Information
Information display can be used to confirm the current
operating condition of the projector and the signal being
projected through the projector.
Press the INFORMATION button to display the
information window on the screen. Press the Point
button or the INFORMATION button again to display the
next page. To hide the information window, press the
INFORMATION button again or Point
The information window can also be selected from the
menu.
DHD800 User Manual
020-000244-01 Rev.1 (08-2010)
Information Menu
buttons.
Note:
• The H- and V-sync freq. values described in this figure
may be different from the actual values.
• SERIAL NO. is used to service the projector.
• When the lamp life reaches a recommended lamp
replacement time, the time shown in Lamp1 or Lamp2
turns red.
Basic Operation
Information Menu
Press the Point buttons
to display the next or previous
page.
29