Picture Image; Image Adjustment - Christie DHD800 User Manual

Picture Image

Image Adjustment

Press the MENU button to display the On-Screen Menu.
1
Use the Point
to the Image Adjust Menu icon.
2
Use the Point
to the desired item and then press the SELECT button
to display the adjustment dialog box. Use the Point
buttons to adjust the setting value.
Contrast
Press the Point button to decrease contrast; press the Point
button to increase the contrast (from 0 to 63).
Brightness
Press the Point button to decrease the brightness; press the
Point button to increase the brightness (from 0 to 63).
Color
Press the Point button to decrease the intensity of the color;
press the Point button to increase the intensity of the color
(from 0 to 63).
Tint
Press the Point buttons to adjust the tint value to obtain
proper color balance (from 0 to 63).
Color Management
The Color Management function can be used to adjust the
LEVEL, PHASE, and GAMMA of the selected display colors
(except for black, white, and gray) on the screen and replace
these colors with other colors if required.
You can store up to eight (8) color management data.
1
Use the Point
to Color Management, and then press the SELECT
button. The projected image freezes, and the COLOR
MANAGEMENT POINTER appears.
2 Use the Point
spot where you want to adjust the color and then press
the SELECT button. The COLOR SELECTION window
appears, and the color in the center of the pointer is
selected and you can adjust the color.
3 Use the Point
PHASE of the color, and then press the SELECT button
to confirm the setting. Then use the Point
adjust the GAMMA for the color and press the SELECT
button to accept the setting. After adjusting, press the
SELECT button to go to the COLOR MANAGEMENT LIST.
COLOR SELECTION MODE
LIST
Go to the COLOR MANAGEMENT LIST.
46
buttons to move the red frame pointer
buttons to move the red frame pointer
buttons to move the red frame pointer
buttons to move the pointer to the
buttons to adjust the LEVEL and
IMAGE ADJUST MENU
POINTER MODE
buttons to
Note:
Displayed in grayout in the computer Input.
• Tint cannot be selected when the video
system is PAL, SECAM, PAL -M, or PAL-N
(p.42).
• Color management is displayed in grayout
when there is no signal.
Image Adjust Menu icon
Move the red frame pointer to the desired
item and then press SELECT button.
Use the Point buttons to adjust the
setting value.
COLOR MANAGEMENT
POINTER
DHD800 User Manual
020-000244-01 Rev.1 (08-2010)