Manual Pc Adjustment - Christie DHD800 User Manual

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector.
Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal
formats. The projector has 10 independent memory areas to store those manually adjusted parameters. It
allows you to recall the setting for a specific computer.
Note:
The PC Adjust Menu cannot be operated when the digital signal input on the DVI terminal is selected on PC
System Menu.
Press the MENU button to display the On-Screen Menu.
1
Use the Point
to the PC Adjust Menu icon.
Use the Point
2
to the desired item and then press the SELECT button
to display the adjustment dialog box. Use the Point
buttons to adjust the setting value.
Fine sync
Use the Point buttons to adjust the value, eliminating a
flicker from the image displayed (from 0 to 31).
Total dots
Use the Point buttons to adjust the number of total dots in
one horizontal period to match your PC image.
Position H
Use the Point buttons to adjust the horizontal picture
position.
Position V
Use the Point buttons to adjust the vertical picture position.
Current mode
Press the SELECT button to show H-sync freq. and V-sync freq.
of the connected computer.
Clamp
Use the Point buttons to adjust the clamp level. When the
image has dark bars, try this adjustment.
Display area H
Use the Point buttons to adjust the horizontal area displayed
by this projector.
Display area V
Use the Point buttons to adjust the vertical area displayed
by this projector.
DHD800 User Manual
020-000244-01 Rev.1 (08-2010)
buttons to move the red frame pointer
buttons to move the red frame pointer
Computer Input
PC ADJUST MENU
PC Adjust Menu icon
Move the red frame pointer to the
desired item and press the SELECT
button.
Selected Mode
Press the Point
the value.
Press the SELECT button at this icon
to adjust "Clamp, " "Display area H, " or
"Display area V. "
Press the SELECT button at this icon
to display the previous items.
Status (Stored/Free) of the
Selected Mode.
buttons to adjust
Current mode
Press the SELECT
button at Current
mode icon to show
the information of the
connected computer.
37