4-34 Configuring Your Server
Setup Utility
This section describes the RAID configuration tool for Onboard RAID Controller (LSI Embedded
MegaRAID), LSI Software RAID Configuration Utility.
Running LSI Software RAID Configuration Utility
1.
When the following screen appears after you have powered on the server, press Esc.
The POST screen appears.
2.
Check the description as shown below on the POST screen, then press Ctrl + M.
LSI Software RAID Configuration Utility starts.
If you fail to press Ctrl + M and the system proceeds without displaying the following
menu screen, reboot the system, and press Ctrl + M on POST screen.
LSI Software RAID Configuration Utility TOP Menu (Management Menu)