3-22 Setting Up Your Server
To connect the power cord from the server to an interruptive power supply (UPS), use outlet socket
on the rear of the UPS. Refer to the manual that comes with the UPS for details.
N8142-23A
Computer interface port (COM)
Reset button for
Outlet socket
Option slot
overload prevention
Connector for TVSS device
Computer interface port (COM)
Input connector
(NEMAL5-15P)
Voltage sensitivity setting button
When the power cord from the server to a UPS, change the BIOS setup of the server to link with
power supply from the UPS.
Change a parameter for "AC-LINK" under the Server menu of the BIOS SETUP utility. See Chapter
4 for details.