Aastra DT690 User Manual page 88

DT690
When you enter your mailbox, you will hear recorded instructions on how to
handle listening, recording, storing and deleting messages, and how to change
your security code.
A new Voice Mail is indicated by a popup message, a sound, and
idle screen. Information is stored in the Voice inbox.
Note:
14.4.1 Activation and Deactivation
For instructions on activation and deactivation, see Section 12.1 on page 65.
Use the number to the Voice Mail system as Answering position number.
14.4.2 Check Voice Mail Inbox
A new Voice Mail is indicated by a popup message, a sound, and an icon in the
idle screen.
To check your voice mails, do one of the following:
•
•
OR
•
To check voice mails from Messaging tab, do the following:
1. Press Menu, select Messaging, and press Select.
2. Select Inbox, and press Select.
If asked, enter your security code.
The
82
• How to handle your mailbox depends on the type of Voice Mail
system. Contact your system administrator if you do not know
which type of Voice Mail system you have.
• It is possible to configure a voice mail number to the voice mail
button via the Desk PDM/CPDM. Please contact your system
administrator.
Press Call from the popup message.
Press and hold 1, when in idle mode.
In case the following message pops up: Voice mail number not
defined, the voice mail number needs to be configured to the voice mail
button. Contact your system administrator.
Enter Messaging from the main menu.
Note: The security code at delivery is the same as the extension number.
is displayed first in the inbox list.
1424-EN/LZT 103 088 Uen A2 2008-11-21
in the