Aastra DT690 User Manual page 103

17.6.2 Automatic Answer
Note: The automatically answer mode is only relevant when a headset or a
To set the phone to answer automatically, do the following:
1. Press Menu, select Settings, and press Select.
2. Mark Answering, and press Select.
3. Mark Answer behaviour, and press Select.
4. Mark Automatically and press Change to activate the automatic mode.
5. Press Back to save the setting.
All incoming calls will be connected automatically when this behavior is
selected.
To remove the setting, press Change.
17.6.3 Automatic Loudspeaker
To set the phone to automatically answer with loudspeaker, when pressing
do the following:
1. Press Menu, select Settings, and press Select.
2. Mark Answering, and press Select.
3. Mark Answer behaviour, and press Select.
4. Mark Loudspeaking and press Change to activate.
5. Press Back to save the setting.
To automatically connect incoming call in Loudspeaker, without pressing any
key, do the following:
1. Press Menu, select Settings, and press Select.
2. Mark Answering, and press Select.
3. Mark Answer behaviour, and press Select.
4. Mark Loudspeaking and press Change to activate.
5. Mark Automatically and press Change to activate the automatic mode.
6. Press Back to save the setting.
1424-EN/LZT 103 088 Uen A2 2008-11-21
Bluetooth headset is connected.
Settings
97