Outgoing Calls; Calling - Aastra DT690 User Manual

7

Outgoing Calls

This section specifies ways of making outgoing calls, how to restrict your
number to not be displayed to the person you are calling, and how to call the
last external number dialed.
It is also possible to make a call from the contacts tab from the main menu, see
Section 8 on page 47.
7.1

Calling

There are some different ways of initiating a call, described in the following
sections. The 25 last received, dialed or missed calls are stored in a call list.
The numbers can be either extension numbers or external numbers. External
numbers are preceded by the digit(s) for external call access.
To call a number that is not stored in the call list, do the following:
1. Enter the number and press
The number is shown on the display while dialing.
2. If needed, press Clear to erase and edit the number.
By using the navigation key, it is possible to step and add or delete a digit in
the middle of a number.
Note:
7.1.1 Dialing Using a Pre-programmed Hot key or Soft key
A hot key or soft key can be programmed with a telephone number. To dial,
do the following:
•
Note: For instructions on how to program hot keys and soft keys, see Section
1424-EN/LZT 103 088 Uen A2 2008-11-21
• It is possible to switch the tone sender in a dialed number on and
off by making a long press on
• If you receive a queue tone when the digit(s) to get an external line
are dialed (if the feature Least Cost Routing is used in the system),
keep waiting. Once a line becomes free you will receive a dial tone.
If a warning tone is heard, the selected line is marked Expensive.
Press the pre-programmed hot key or soft key.
The call will automatically be connected.
9 on page 53.
or Call.
.
Outgoing Calls
37