Messages; Manual Message Waiting - Aastra DT690 User Manual

14

Messages

When receiving a message, the indicator starts flashing, accompanied by a
message tone or beep or vibrating alert. If a message is received during a call,
a beep notifies the user. The new message icon
The icon will remain in the display until all new messages are opened.
There are three types of messages:
•
•
•
14.1

Manual Message Waiting

If a called extension does not answer it is possible to initiate a message waiting
indication on that extension (if this function is allowed). If there is a message
waiting, you will hear a special dial tone.
14.1.1 Answering Manual Message Waiting
To answer a manual message waiting:
•
14.1.2 Order Manual Message Waiting to Another Extension
To order manual message waiting to another extension, when in idle mode,
do the following:
1. Press *31* and enter the extension number.
2. Press # and
Wait for the call timer to start in the display.
3. Press
The message is sent to the called extension.
14.1.3 Cancel Manual Message Waiting to Another Extension
To cancel manual message waiting, do the following:
1424-EN/LZT 103 088 Uen A2 2008-11-21
Manual Message Waiting (MMW), see Section 14.1 on page 77.
Text Messages, see Section 14.2 on page 78.
Voice Mail, see Section 14.4 on page 81.
Press .
A call is initiated to the extension that requested the MMW.
.
to finish the procedure.
Messages
is shown in the display.
77