Timer Mode - Grundig CDM 800 User Manual

TIMER MODE

Setting the time
1 Press »
Note:
You can light up the display if you want by pressing » DISPLAY«.
2 Press »MEMORY« on the device.
0 : 00
– Display: »0:00«, the hours display flashes.
3 Set the hours by pressing »
– Hold down »
4 Press »MEMORY« on the device.
I 2 : 00
– Display: for example »12:00«, the minutes display flashes.
5 Set the minutes by pressing »
– Hold down »
6 Store the time by pressing »MEMORY« on the device.
I 2 : 3 0
Note:
If you do not press any button within 10 seconds the device will cancel
the setting. Start again at Step 2.
Sleep timer (falling asleep to music)
1 Press »
2 Select the function by pressing »SLEEP« on the remote control.
I 20
– Display: » SLEEP« and » 120« (maximum permissible period).
SLEEP
3 Using the »SLEEP« button on the remote control, enter the switch-off
time (120, 90, 60, 45, 30 or 15 minutes).
– After the set time has elapsed, the device shuts off.
Note:
You can switch off the radio before the end of the sleep period by
pressing »
ON/OFF timer
Setting the ON/OFF timer
Note:
Use the buttons on the device to perform this setting.
1 Press »
Note:
You can light up the display if you want by pressing » DISPLAY«.
________________________________________
STANDBY « to switch off the device.
5 a a a
5 a a a « or » s s s 6
5 a a a
« or »
5 a a a s s s 6
STANDBY « to switch on the device.
STANDBY «.
STANDBY « to switch off the device.
« or » «.
s s s 6
« to set the hours more quickly.
« or » «.
s s s 6
« to set the minutes more quickly.
37