Connecting The Loudspeakers - Grundig CDM 800 User Manual

L
IMPEDANCE : 3.2 Ohm [ ]
R
L
LOUDSPEAKERS
Attaching the loudspeakers to the device
1 Place the loudspeaker in the guide from behind and slide it on to the
device casing.
2 To take off the loudspeaker push out the locking mechanism and slide
back the loudspeaker.

Connecting the loudspeakers

1 Connect the loudspeakers to the
the device.
To insert the speaker cables press the spring buttons on the terminals.
Insert the »–« wire of the cable into the black (–) terminal and the »+«
wire (marked) into the red terminal.
Note:
Once you have connected the loudspeakers to the device you can wind
the loudspeaker cables around the brackets.
___________________________________
ANTENNA PHONES
»R L + –« terminals on the back of
R L
IMPEDANCE : 3.2 Ohm [ ]
R
L
FM BEAT CUT
STEREO = = 2
MONO = = 1
OFF 0
29