Grundig CDM 800 User Manual page 20

TIMER
ON
0:00
TIMER
ON
20: I 5
TIMER
0:00
TIMER
22 :00
TIMER
ON OFF
I 8:3 0
TIMER
ON OFF
T MR C L R
38
TIMER MODE
2 Press »MODE/TIMER«.
– Display: » TIMER« and »0:00«, » ON« flashes.
3 Press »MEMORY« and enter the hours for the ON time by pressing
» 5 a a a
4 Press »MEMORY« and enter the minutes for the ON time by pressing
» 5 a a a
5 Press »MEMORY« to store the ON time.
– Display: » TIMER« and »20:15«, » ON« flashes.
6 Press »MODE/TIMER«.
OFF
– Display: » TIMER« and »0:00«, » OFF« flashes.
7 Press »MEMORY« and enter the hours for the OFF time by pressing
» 5 a a a
8 Press »MEMORY« and enter the minutes for the OFF time by pressing
OFF
» 5 a a a
9 Press »MEMORY« to save the OFF time.
10 Conclude the setting by pressing »MODE/TIMER«.
– Display: the current time, »TIMER« »ON« and »OFF« light up.
The device will automatically switch on and off at the times entered.
Note:
If you do not select a time within 10 seconds, the device cancels the
setting. Start again at Step 2.
You can also enter an ON or OFF time only.
Switching off the ON/OFF timer
1 Press »MODE/TIMER« and then » «.
– Display: »TMR CLR« flashes briefly, » TIMER«, » ON« and » OFF« then
go out.
Note:
To re-activate the ON/OFF timer repeat the setting described here
under "Setting the ON/OFF timer".
_________________________________________
« or » s s s 6 «.
« or » s s s 6 «.
« or » s s s 6 «.
« or » s s s 6 «.