Technical Data - Grundig CDM 800 User Manual

3 2 1 1
CLASS 1
LASER PRODUCT
INFORMATION
Tape unit
Protect your cassettes from humidity, dust, heat and cold.
Do not store your cassettes near devices with strong magnetic fields such as
television sets or stereo speakers.
After using a cassette, put it back in its protective case.
To guarantee good recording and playback quality, clean the parts shown
(1, 2, 3) after every 50 hours of use, or once a month.
Open the tape compartment and moisten a cotton swab with alcohol or a
special head-cleaning fluid. Begin playback and clean the capstan idler (3).
Then pause playback and clean the capstan (2) and the magnetic heads (1).
Close the tape compartment. To clean the magnetic heads (1), you can also
play a cleaning tape.
CD unit
If the device is unable to scan CDs perfectly, use a standard commercial
cleaning CD to clean the laser optics. Other cleaning methods may damage
the laser optics.
You will find a symbol similar to the one shown here on the bottom of the
device.
CLASS 1 LASER PRODUCT means that the laser is designed in such a way
as to ensure that the maximum permissible emission value cannot be
exceeded under any circumstances.
If operation devices or methods other than those specified here are
employed, it may lead to dangerous exposure to emissions.
Invisible laser radiation is emitted if the CD compartment is opened and the
safety locking mechanism is shorted. Do not expose yourself to this
radiation.

Technical data

Power supply
Mains operation: 230 V, 50/60Hz
Battery operation:
8 x 1.5 Volt (LR14, AM2)
Back-up battery:
2 x 1.5 Volt (R03/UM4 AAA)
Remote control:
2 x 1.5 Volt (R03/UM4 AAA)
Output:
DIN 45324, 10% THD
Music signal power: 2 x 8000 mW
Sine wave power: 2 x 5000 mW
Radio unit
FM 87.5 ...108.0 MHz
MW 522 ... 1611 kHz
Antennas:
Telescopic antenna for FM
Ferrite rod antenna for MW
_____________________________________
CD unit
Frequency response: 20 Hz ... 20 kHz
Noise voltage ratio: ≥ 65 dB
Cassette unit
Sound recording medium: Compact
cassette according to DIN 45516
Tape speed: 4.76 cm/sec.
Frequency range: 80 Hz ... 10 kHz
Noise voltage ratio: ≥ 45 dB
Band speed fluctuation: ≤ 0.35 %
Automatic recording level control
Dimensions and weight
Device:
W x H x D: 170 x 275 x 210 mm
Weight: 3.15 kg
Loudspeakers:
W x H x D: 143 x 275 x 205 mm
Weight: 1.15 kg
39