Power Supply; Mains Operation; Battery Operation - Grundig CDM 800 User Manual

POWER SUPPLY

Mains operation

Note:
Check if the mains voltage on the type plate (on the bottom of the
device) corresponds to your local mains supply.
The only way to disconnect the device from the mains supply is to pull
out the plug.
1 Plug the mains cable supplied into the socket
2 Insert the mains cable plug into the mains socket.

Battery operation

1 Unplug the mains cable from the device and remove the cover panel on
the back of the device by pressing the snap-catches and removing the
lid.
2 Insert eight batteries (C-cell, LR14 or AM2), observing the polarity
marked on the bottom of the battery compartment.
ANTENNA PHONES
Memory back-up batteries
In order to preserve saved settings while the device is switched off, two
additional back-up batteries must be inserted. Insert the batteries
(Alkaline AAA R03/UM4) into the battery compartment. These batteries
must always be inserted, regardless of the power supply (network or
battery operation).
Note:
Remove the batteries when they are flat or when you know that the
device will not be used for a long period of time. No liability is accepted
for damage resulting from leaking batteries. The batteries are switched
off during mains operation.
Environmental note:
Batteries, including those which are heavy metal-free, may not be
disposed of with household waste. Please dispose of used batteries in
and environmentally sound way, for example at public collection points.
Find out about the legal regulations which apply in your area.
___________________________________
~
»AC « on the device.
ANTENNA PHONES
R L
IMPEDANCE : 3.2 Ohm [ ]
R
L
FM BEAT CUT
STEREO = = 2
MONO = = 1
OFF = = 0
OPTICAL
OUT
27