Playing Back Tracks In A Selected Order - Creating A Track Memory - Grundig CDM 800 User Manual

CD
MEMORY
FLAT 0 I P- 0 I
CD
MEMORY
FLAT 04 P- 0 I
CD
MEMORY
FLAT 04 P- 02
II
CD
MEMORY
FLAT 0 I 0 : 00
34
CD MODE
_____________________________________________
Playing back tracks in a selected order – creating
a track memory
This function enables you to store up to 20 tracks on the current CD in a
certain order and then play them back in that sequence. The same track may
be stored more than once.
Selecting and storing tracks
1 Place a CD in the CD compartment.
Note:
The device must be in the STOP position.
2 Select the function by pressing » MEMORY« on the device.
– Display: »0 ! P - 0 1 «, »MEMORY« flashes.
3 Select the track using »
SKIP« or »F-SKIP« on the remote control.
– Display: for example »0 4 P - 0 1 «.
4 Store the track by pressing » MEMORY« on the device.
– Display: e.g. »0 4 P - 0 2 «.
Note:
Repeat steps 3 and
If you try to store more than 20 tracks, the track memory is deleted.
Playing back the track memory
1 Press » « to start playback of the track memory.
II
– Playback begins with the first programmed track.
2 To end playback of the track memory press »
Deleting the track memory
1 With the CD stopped, press »
Note:
The track memory is also deleted if
– The device is switched off using the »
– The mains cable is unplugged or the batteries are removed from the
device.
5 a a a « or » s s s 6
4 to store the other tracks.
« or open the CD compartment.
7
STANDBY
« on the device or »R-
«.
« button.