Timer Mode; Switch-On Timer - Grundig MS 510 Instructions Manual

TIMER MODE

Your hi-fi system has three timer modes:
– T he switch-on timer, which switches the hi-fi
system on at a preset time and wakes you
with the input source you selected.
– T he reminder timer, which reminds you by
sounding the signal tone at a preset time.
– T he sleep timer, which switches the hi-fi sys-
tem off at a preset time.
Notes:
You can only set the timer mode with the but-
7
tons on the remote control.
The time has to be set on the hi-fi system.
7
When this setting is being made, if no button
7
is pushed for more than 10 seconds, the hi-
fi system will end the process automatically.
You then have to start again.
--------------------------------------------------------------------------------------------------------------------------

Switch-on timer

Setting the switch-on timer
1 Switch the hi-fi system to standby mode by
pressing » 8 «.
≈
2 Press »
« from the switched off state.
– D isplay: » « flashes.
OFF
3 Select the display »
≈
and confirm with »
– D isplay: » «, the hours of the switch-off
BUZZER
time flash.
4 Enter the hours of the switch-on time with »E«
or »F« and confirm with »
Enter the minutes of the switch-on time with »E«
or »F« and confirm with »
– D isplay: the last input source selected flash-
es.
5 Select the input source (buzzer, FM, CD, SD
or USB) by pressing »E« or »F« and confirm
≈
with » «.
Note:
If you selected the signal source CD, SD or
7
USB and the file is damaged or there is no
CD in the CD compartment or no auxiliary
device is connected, the hi-fi automatically
switches on with the signal tone (buzzer).
6 Set the volume with »E« or »F« and confirm
≈
with » «.
≈
– D isplay: » « and »
rent time.
– T he switch-on timer is activated.
Activating and deactivating the
alarm
1 Deactivate the alarm by pressing »
briefly.
– D isplay: » § « or
switch-on timer is deactivated.
« by pressing »E« or »F«
ON
«.
≈
«.
≈
«.
§ « or the cur-
» « and
e
≈
« once
disappear when the
» «
e
ENGLISH
23