Timer­mode; Timer; Sleep Timer - Grundig UMS 2020 Manual

TIMER­MODE
Your hi-fi system has two timer modes:
– T he timer, which switches the hi-fi system
on at the set time, wakes you with the input
source you selected and then switches off.
– T he sleep timer, which switches the hi-fi sys-
tem off at a preset time.
Notes
The settings for the Timer mode can only
7
operated with the buttons on the remote
control.
The time must be set on the hi-fi system.
7
When this setting is being made, if no button
7
is pushed for more than 10 seconds, the hifi
system will end the process automatically.
You then have to start again.

Timer

Setting­the­timer
1 In standby mode, press and hold »TIMER­SET«
on the remote control.
TIME« appears, then the clock
– Display: »ON
digits for the hours flash.
2 Setting the switch on time, press »
set the hours sand confirm with »TIMER­SET«.
Press » « or » « to set the minutes and con-
5 6
firm with »TIMER­SET«.
TIME« appears, then the clock
– Display: »OFF
digits for the hours flash.
3 Setting the switch off time, press »
set the hours and confirm with »TIMER­SET«.
Press » « or » « to set the minutes and con-
5 6
firm with »TIMER­SET«.
– Display: the source appears.
4­Select the desired sound source (TUNER, CD,
USB or SD) with »
5
Confirm your desired mode with »TIMER­SET«.
– Display: the volume appears.
Note:
If CD/USB/SD source is selected and
7
there is an error, TUNER will be selected
automatically.
20­
ENGLISH
­--------------------------------------------------------------------------------------------------------------------------
« or »
5 6
« or »
5 6
« or » «.
6
5 Select the desired volume with »
Confirm with »TIMER­SET«.
– D isplay: »
– T he timer is now set and activated.
Activating­and­deactivating­the­
timer
1 In standby or during playback, press
»TIMER­ON/OFF« on the remote control
once.
– D isplay shows »
pears if deactivated.
Sleep­Timer­
Setting­the­sleep­timer
1 Switch on the hi-fi system from standby by
pressing » 8
2 Open the function with »SLEEP«.
– Display: »SLP
3 Set the switch-off time (»90«, »80« till »10«,
»OFF«) by pressing »SLEEP«.
– D isplay: briefly, for example »SLP 30«, then
the selected input source and »SLEEP«.
« to
– T he hi-fi system switches off after the selected
time has elapsed.
Ending­the­sleep­timer­prematurely
1 To switch off the sleep timer prematurely, keep
pressing »SLEEP« on the remote control until
»OFF« appears and »SLEEP« disappears in the
« to
display;
or
switch the hi-fi system to standby mode by
pressing » 8
5
«.
« if activated, and disap-
«.
90« and »SLEEP« appears.
«.
« or » «.
6