Recording From The Radio; Fast Forward/Rewinding The Cassette - Grundig CDM 800 User Manual

36
TAPE MODE
___________________________________________
R
ecording from the radio
1 Put a cassette with the protection tabs intact in the cassette compartment,
and press the »
the tape.
2 Select TUNER as the input source using the » TUNER/BAND« button.
– Display: the set frequency and waveband.
3 Select the preset station number using
UP« on the remote control.
4 Press » « to start recording.
– The » « button is automatically engaged.
– The device automatically stops recording at the end of the tape.
Note:
If while recording MW radio programmes you notice interference, move
the »BEAT CUT
different position.
5 To pause the recording press
Resume recording by pressing
6 To break off recording, press » «.
Recording from a CD (CD Synchro)
1 Put a cassette with the protection tabs intact in the cassette compartment,
and press the »
the tape.
2 Select CD as the input source using the » CD« button.
3 Press » « to start recording.
– The » « button engages automatically and the CD playback is
started automatically from the beginning of the CD or the beginning of
the stored track memory.
Note:
If you only want to record a particular track or passage on the CD,
select it using » 5 a a a
»F-SKIP« on the remote control and press »

Fast forward/rewinding the cassette

1 From the STOP position, press »
– » « fast forwards to the end of the tape, »
beginning of the tape.
2 Press » « when you reach the required position on the tape.
« and » « buttons to find the right position on
»DOWN
STEREO« switch (in the battery compartment) to a
»II «.
»II «.
« and » « buttons to find the right position on
« or » s s s 6 « on the device or »R-SKIP« or
« or »
PRESET« or »PRESET
« to start recording.
«.
« rewinds to the