Timer Mode; Switch-On Timer - Grundig CIRFLEXX UMS 4100 Manual

Hifi stereo micro system
Hide thumbs Also See for CIRFLEXX UMS 4100:
Table of Contents

Advertisement

w
0 n
1 2
:
0 0
w
0 n
1 8
:
0 0
w
o f f
1 2
:
0 0
32

TIMER MODE

Your stereo system has two timer modes:
– The switch-on timer, which switches the stereo system on and off at a pre-set
time.
– The sleep timer, which switches off the stereo system at a pre-set time.

Switch-on timer

Setting the switch-on timer
Note:
The clock on the device must have been set. If, when setting the time, no but-
ton is pushed for a period of longer than 10 seconds, the system will end the
process automatically. You then have to start again at the beginning. During
setting, the display can be illuminated for approximately 8 seconds by pres-
sing any of the buttons.
With the device switched off, press and hold down »TIMER«.
1
– Display: »
2
Set the hours for switching on using »
3
Press »TIMER«.
– Display: »
Set the minutes for switching on using »
4
device.
Press »TIMER«.
5
– Display: »
6
To enter the switch-off time, repeat steps
7
Press »TIMER«.
– Display: »
Select the CD or tuner input source using »
8
device.
Note:
If you select CD, make sure that a CD has been inserted.
__________________________________________________________________
« and »ON«, the hour display flashes.
w
TUNING UP/DOWN
« and »ON«, the minute display flashes.
w
« and »OFF«, the hour display flashes.
w
« »TUNER« or »CD«.
w
« on the device.
TUNING UP/DOWN
2
to 4.
TUNING UP/DOWN
« on the
« on the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents