Table of Contents
Advertisement
The ringing pattern you are hearing is displayed.
Note:
You can also press <Next> or <Prev> to cycle through all eight ringing patterns.
3
If you want to save the ringing pattern currently being played, do not press <Ring> anymore. You will hear the
selected ringing pattern two more times, and then it will automatically be saved.
You hear confirmation tone (two rising tones).
The red light next to <Ring> goes off.
Note:
If you receive a call, go off-hook, or lose power during selection, the process is interrupted and
you must start again.
To test the lights and the display on your telephone
1
While on-hook or off-hook, press and hold <Test>.
The green light next to <Test> goes on.
Note:
If the green light next to <Test> flashes rather than goes on steadily, it means the telephone is not
communicating with the switch. In such a case, call the
The lights go on steadily in four groups, and the display fills in all the segments.
2
To end test, release <Test>.
The lights return to the pretest state; the green light next to <Test> goes off.
Note:
If the display or the lights do not respond during the test, call the
trouble ticket.
You can access this feature with the softkeys only if the feature's abbreviation, SAC, appears on the second line of one
of the feature option screens.
To send all calls immediately to coverage (if your system manager has provided a coverage path for your
extension)
1
While on-hook, press <Menu> and then press the softkey below SAC or, if SAC is not available on your display,
press <Send Calls> (while on-hook) or dial the Send All Calls code *3 (while off-hook).
Note:
You may hear a
Self-Test
Send All Calls
ring-ping
tone from your telephone as each call is redirected.
Helpdesk
at x2964.
Helpdesk
at x2964 to open a
[confirmation tone]
20
Hide quick links:
Advertisement
Table of Contents
