Alcatel-Lucent 8410D User Manual page 21

To cancel Send All Calls
1 While on-hook, press <Menu> and then press the softkey below SAC again or, if SAC is not available on your
display, press <Send Calls> again (while on-hook) or dial the Send All Calls Cancel code #3 (while off-hook).
To place or answer a call without lifting the handset, or to use the speakerphone with any feature
1 Press <Speaker>.
The red light next to <Speaker> goes on steadily.
2 Place or answer the call, or access the selected feature.
3 Adjust the speakerphone volume if necessary.
Press the right half of the Volume control button to raise the volume. Press the left half of the Volume control
button to lower the volume.
The display shows the following:
SPEAKER L >>>>> H
There are eight possible volume settings. One arrow is the lowest setting, and eight arrows is the highest setting.
Note: The Volume control does not affect an external speakerphone attached to your telephone.
To change from the speakerphone to the handset
1 Pick up the handset and talk.
The red light goes off next to <Speaker>.
To change from the handset to the speakerphone
1 Press <Speaker>.
The red light goes on next to <Speaker>.
2 Hang up the handset.
To prevent the other party from hearing you
Note: If the Speakerphone feature is not active, the Mute feature turns off the microphone associated with the
handset (not the speakerphone). However, if the speakerphone is active and the handset is not active, then
the Mute feature turns off the microphone associated with the speakerphone (not the handset).
1 Press <Mute>.
The red light next to <Mute> goes on and other party cannot hear you.
Speakerphone
[confirmation tone]
21