Table of Contents
Advertisement
The call is automatically dialed.
To retrieve a message when your Message light is on
1
See the
Audix Documentation
You can access this feature with the softkeys only if the feature's abbreviation, AutCB, appears on the second line of
one of the feature option screens.
To automatically place another call to an extension that was busy, did not answer, or returned a call waiting
ringback tone
1
Press <Menu> and then press the softkey below AutCB during the call attempt or, if AutCB is not available on
your display, press <AutoCallBk> during the call attempt.
Note:
If you send your calls to coverage after activating Automatic Callback, your callback calls will
still ring at your extension and will not be redirected to coverage.
2
Hang up.
You will get a
3-burst ring
is sent to the called party.
3
Lift the handset when you hear the
Note:
Automatic Callback is automatically canceled after 30 minutes.
To cancel Automatic Callback
1
While on-hook, press <Menu> and then press the softkey below AutCB again or, if AutCB is not available on
your display, press <AutoCallBk> again (while on-hook).
You can access the Consult feature with the softkeys only if the feature's abbreviation, Cnslt, appears on the second line
of one of the feature option screens.
Audix
for instructions.
Automatic Callback
when both you and the called extension are idle; when you answer, regular ringing
3-burst
ring.
Call Coverage
[ringback tone]
[confirmation tone]
11
Hide quick links:
Advertisement
Table of Contents
