Ending Active Calls; Muting The Microphone; Redialing Numbers - Polycom SoundStation IP 5000 User Manual

Note

Ending Active Calls

Note

Muting the Microphone

Redialing Numbers

To ignore Incoming calls, press the Reject soft key (for private lines) or the
Silence soft key (for shared lines). To prevent your phone from ringing, enable the
Do Not Disturb feature (see
You can forward incoming calls by pressing the Forward soft key (see
Forwarding Calls Dynamically
If you set up your phone with a silent ring, press the Answer soft key to answer the
call.
To answer a call on a shared line:
Answer the incoming call.
1.
Press the Hold soft key.
2.
Anyone on another phone configured to use the same shared line can take the
call by selecting the call on their phone screen.
To end a call:
>>
Press or the End Call soft key.
You cannot end a call that is on hold until you resume the call. To end a call on hold,
press the Resume soft key, and then end the call.
To mute the microphone:
>>
During a call, press
The three console LEDs glow red to indicate that the other party (or parties)
cannot hear you. You can still hear all other parties while Mute is enabled.
To turn off the Mute feature, press
You can redial the last number you dialed, or search a list of placed calls to find
a previously-dialed number.
Using Do Not Disturb on page 3-14).
on page 3-13).
.
again.
3 - 4