Obtain An Ip Address Automatically - Billion BiPAC 7404V(G)OX/V(G)PX User Manual

EWAN

Obtain an IP Address Automatically

Profile Port: Select the profile port as EWAN.
WAN Port: the router offers its Ethernet port 1 as a WAN port to be used to connect to Cable
Modems and fiber optic lines.
Protocol: Select Obtain an IP Address Automatically.
NAT: The NAT (Network Address Translation) feature allows multiple users to access the
Internet through a single IP account, sharing the single IP address. If PCs in LAN should share
the WAN IP for WAN access, please enable NAT. If users on your LAN have public IP
addresses and can access the Internet directly, the NAT function can be disabled.
MAC Spoofing: Some service providers require the configuring of this option. You must fill in
the MAC address that specify by service provider when it is required. Default is disabled.
Obtain DNS: Select Automatic to use DNS.
Primary DNS/ Secondary DNS: Enter the IP addresses of the DNS servers.
The DNS servers are passed to the DHCP clients along with the IP address and the subnet
mask.
IPv6: check to enable IPv6 service. Enter IPv6 Gateway address and set IPv6 DNS as same in
IPv4 mode.
Gateway: type the gateway address to which WAN packets are forwarded.
Obtain IPv6 DNS: check Automatic to obtain DNS automatically. If not, please type the
concrete ones in the Primary and Secondary fields.
80