Billion BiPAC 7404V Series Quick Start Manual
Voip (802.11g) adsl2+ (vpn) firewall router
Hide thumbs
Also See for BiPAC 7404V Series:
- User manual (165 pages) ,
- Quick start manual (14 pages) ,
- User manual (154 pages)
Related Manuals for Billion BiPAC 7404V Series
Summary of Contents for Billion BiPAC 7404V Series
- Page 1 All manuals and user guides at all-guides.com BiPAC 7404V Series VoIP/ (802.11g) ADSL2+ (VPN) Firewall Router Quick Start Guide...
- Page 2 All manuals and user guides at all-guides.com...
- Page 3 All manuals and user guides at all-guides.com Billion BiPAC 7404V Series ADSL2+ Router PLEASE READ THE QUICK START GUIDE AND FOLLOW THE STEPS CAREFULLY. THIS QUICK START GUIDE WILL HELP YOU INSTALL THE DEVICE PROPERLY AND AVOID IMPROPER USAGE. IF YOU NEED MORE INFORMATION ON THIS SOFTWARE CONFIGURATION, PLEASE REFER TO THE USER’S MANUAL ON...
-
Page 4: Hardware Overview
All manuals and user guides at all-guides.com Quick Start Guide Hardware Overview BiPAC 7404VP does not support 802.11g The Front LEDs Lit Green when successfully connected to an ADSL DSLAM, Lit when connected to an (“line synch”). Ethernet device. Lit Orange when there is a PPPoA Green for 100Mbps;... -
Page 5: Hardware Connection
All manuals and user guides at all-guides.com Billion BiPAC 7404V Series ADSL2+ Router Hardware Connection Hardware Installation 1. Power Connection Plug the supplied power adapter to the wall jack and the other side to the router. Please note that the plug type may differ according to different countries. - Page 6 All manuals and user guides at all-guides.com Quick Start Guide 3. ADSL Connection Connect the supplied RJ-11 phone cable to the router’s ADSL port, and the other side to the phone jack on the wall. 4. Splitter/ Micro-filter Connection Splitter / Micro-filter are important for ADSL installation. It helps high-frequency signals are directed to the ADSL modem, and low-frequency signals are directed to the telephone or other analog voice-channel device to prevent inter-modulation distortion and get good speed and stable ADSL sync rate.
-
Page 7: Setup Utility
All manuals and user guides at all-guides.com Billion BiPAC 7404V Series ADSL2+ Router Setup Utility After you complete the hardware installation, insert the CD-ROM to the CD-ROM drive to perform Setup Utility for network configuration. The Setup Utility will auto-run. Follow the step-by-step configuration wizard, the utility will guide you complete the basic network configuration.