Setting Up The Printer Software; Networking - Lexmark MX610 Series User Manual

Additional printer setup
Use the
7 USB printer port
8 Security slot

Setting up the printer software

Installing the printer
1
Obtain a copy of the software installer package.
2
Run the installer, and then follow the instructions on the computer screen.
3
For Macintosh users, add the printer.
Note: Obtain the printer IP address from the TCP/IP section in the Network/Ports menu.
Adding available options in the print driver
For Windows users
1
Open the printers folder, and then select your printer.
2
Open the printer properties, and then add or manually install any options.
3
Apply the changes.
For Macintosh users
1
From System Preferences in the Apple menu, navigate to your printer, and then select Options & Supplies >
Driver.
2
Add any installed hardware options.
3
Apply the changes.

Networking

Notes:
•
Purchase a MarkNet
For information on installing the wireless network adapter, see the instruction sheet that came with the
adapter.
•
A Service Set Identifier (SSID) is a name assigned to a wireless network. Wired Equivalent Privacy (WEP), Wi-Fi
Protected Access (WPA), WPA2, and 802.1X-RADIUS are types of security used on a network.
Preparing to set up the printer on an Ethernet network
To configure your printer to connect to an Ethernet network, organize the following information before you begin:
To
Connect the printer to a computer.
Attach a lock that will secure the printer in place.
TM
N8350 wireless network adapter first before setting up the printer on a wireless network.
47