Too Many Trays Attached; Unformatted Flash Detected - Lexmark CS410 Series User Manual

Troubleshooting

Too many trays attached [58]

1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Remove the extra trays.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.

Unformatted flash detected [53]

Try one or more of the following:
•
From the printer control, select Continue to stop the defragmentation and continue printing. For non‑touch‑screen
printer models, press
• Format the flash memory.
Note: If the error message remains, then the flash memory may be defective and need to be replaced.
Waste toner bottle nearly full [82.xy]
You may need to order a waste toner bottle. If necessary, select Continue on the printer control panel to clear the
message and continue printing. For non‑touch‑screen printer models, press
Weblink server not set up. Contact system administrator.
From the printer control panel, press
Note: If the message appears again, then contact your system support person.
to confirm.
to clear the message.
to confirm.
155