Using Call Queues (Call Queue Users Only); Assigning Speed Dial Indexes - Polycom SoundPoint IP 335 User Manual

Using Call Queues (Call Queue Users Only)

Assigning Speed Dial Indexes

Note
Phones on 8x8 Call Queues can log in and out of Call Queues if the Call Queue
Admin has granted log in/out permission to the user.
To enter or exit a Call Queue:
Press
1.
recently used Call Queue, you can select Apps Continue).
Select Call Queues > Log In All to enter all your Call Queues (or Log Out
2.
to exit your Call Queues).
If you are not a member of a Call Queue set up by your administrator, you will
get a message that you do not belong to any Call Queues.
You can associate a contact with
frequently used number.
For example in the figure below, pressing
The contact with the lowest speed dial index will be associated with the Line 2 key
for single touch dialing.
For other frequently used numbers, you can associate them with a speed dial
index. To dial a contact associated with a speed dial index, enter the speed dial
index followed by the # key using the dial pad, then press
up the handset
The Speed Dial list can be accessed by pressing
Features > Speed Dial... or by pressing the Up arrow key from the idle screen.
When a new entry is added to the Contact Directory, it is automatically
assigned the next available speed dial index and the new entry appears at the
bottom of the Speed Dial list.
Using the Features of Your SoundPoint IP 335 Phone
and select Applications > Apps Home (or if you just
for single touch dialing of a
places a call to James.
and selecting
or pick
3 - 20