Polycom SoundPoint IP 335 User Manual page 33

Press to enter a first name.
4.
Entry to this field is alphabetic as denoted by
Enter the first name of the contact from the dial pad.
5.
Press the Ok or Cancel soft keys to accept or cancel changes.
6.
Press to display the next field in the contact's entry.
7.
8. Repeat steps 4 to 8 to enter the last name of the contact.
Repeat steps 4 to 8 to enter a contact number.
9.
This is a required field and it must be unique (not already in the directory).
Entry to this field must be numeric as denoted by
10. Repeat steps 4 to 8 to change the Speed Dial Index if desired.
It is automatically assigned to the next available index value.
For more information, refer to
11. Repeat steps 4 to 8 to change the Ring Type and Divert Contact if desired.
These fields may be left blank.
For more information on setting the Ring Type field, refer to
Distinguishing Calls
For more information on diverting contacts, refer to
page 2-21.
12. Repeat steps 4 to 8 to change the Auto Reject, Auto Divert, Watch Buddy,
and Block Buddy if desired.
Use , ,
settings.
For more information on setting the Auto Reject field, refer to
Calls on page 2-20.
Customizing Your SoundPoint IP 335 Phone
Assigning Speed Dial Indexes
on page 2-19.
, or to switch between Enabled and Disabled
.
.
on page 3-20.
Diverting Calls on
Rejecting
2 - 13