Polycom SoundPoint IP 335 User Manual page 52

Note You can either dial the phone number directly or search for the number in the
Contact Directory or Call Lists. For more information, refer to
3-2, Searching For a Contact
Press Conf soft key to create a new call.
2.
The active call is placed on hold.
Call the second party.
3.
4. When the second party answers, press the Conf soft key again to join all
parties in the conference.
To split a conference call:
Press the Split soft key to split the conference.
Both parties will be on hold.
To set up a conference call using the Join soft key:
When you are in an active call:
If you have one call on hold (on the same line or other line), use
a
to go to the call on hold, then press the Join soft key.
A conference is created with the active call, the call on hold and
yourself.
If you have more than one call on hold, use
b
to the desired call on hold, press the Join soft key.
A conference is created with active call, the call on hold and yourself.
To end a conference call:
Press the EndCall soft key or hang up.
The other parties will continue to be connected.
Using the Features of Your SoundPoint IP 335 Phone
on page 2-18, or Managing Call Lists
Placing a Call on page
on page 2-9.
and to switch
3 - 9