Configuring Basic Settings
Appearance of Time and Date
To configue basic settings, press
Basic. You can configure the following basic settings:
•
The appearance of the time and date
•
Display contrast
•
Backlight intensity
•
Headset Memory Mode
•
Headset hookswitch selection
•
Ring type
•
Language support (localization)
•
Directory search
You can mute the microphone and adjust the volume using separate keys.
The time and date appears on the graphic display of the SoundPoint IP 335 SIP
phone. If the phone cannot obtain a time and date from a configured SNTP
server, the display will flash. Contact your system administrator if either the
time or date is incorrect.
You have control over the format of the time and date display and can turn the
display of time and date off. The default time and date format appears in the
following figure.
To configure the time and date:
Press
1.
Select Settings > Basic > Preferences > Time & Date.
2.
Select from Clock Date, Clock Time, Clock Order, or Enable/Disable.
3.
Scroll through the options under each of these selections using the
4.
and
.
Customizing Your SoundPoint IP 335 Phone
.
, and then select Settings >
2 - 2