Polycom SoundPoint IP 335 User Manual page 46

During a call, you can alternate between Handset, Headset, or Hands-Free
Speakerphone modes by pressing the
handset.
Call duration on an active call is monitored through a local call timer. This is
visible within the active call window on the graphic display. In the figure
below, the call to James Dean has lasted 2 hours 48 minutes 23 seconds so far.
To place a call using the handset:
1. Do the following steps in any order:
— Pick up the handset.
— Dial the desired number using the dial pad.
URL or IP dialing is not supported on registered phones. If your phone is
Note
intentionally unregistered, the default dialing mode is by URL.
To place a call using Hands-Free Speakerphone mode:
If "Handsfree mode disabled" appears on the graphic display after you press the
Note
speakerphone key
your phone.
Do one of the following steps:
1.
With the handset on-hook, press
a
or the NewCall soft key to obtain dial tone.
Dial the desired number using the dial pad.
With the handset on-hook, dial the desired number using the dial pad.
b
Press
Using the Features of Your SoundPoint IP 335 Phone
,
your system administrator has disabled the speakerphone on
,
or keys, or picking up the
,
, or .
, ,
3 - 3